To make sure that you are paying the lowest amount on your homeowner’s insurance, compare the cost of your insurance policy to another company’s policies at least once a year. You should also review your existing policy and mark any changes that may have occurred which could lower your premium.

Make sure you have homeowner’s insurance that includes a guaranteed replacement value policy. Doing so means that the insurance company will have to cover the whole cost of rebuilding your home in case of disaster. Since these costs tend to rise as time goes by, this policy will guarantee that you can afford to replace your home.

A lot of home insurance comp-any give special discount if you have a Fire Safety Plan in a commercial building.  Check out www.getfireplan.com

The best way to lower your insurance payment is to raise your deductible. A high-deductible policy is a bet against the house, so to speak. You’re preferring the risk of having to shell out for a high deductable over the fact of having to shell out a higher amount of money every month. So, if you are conservative, this may not be the best fit. But if you’re willing to chance having to pay out that high deductible, then this strategy is worth adopting.

As with the people all around the country, you also need a great insurance policy on your home to protect you against flood damage and other disasters that happen without warning. Follow the tips listed in this article to find the best coverage for the best price.

 

We at get www.getfireplan.com get a lot of calls from owners and Property Managers who panic about a fire violation.   Normally most clients will admit that they have been told by the local fire department that they need to fix some of the issues like having a Fire Safety Plan or Fire Plan for short.

Should you just ignore them? We are here to tell you that you need to take local Fire Department seriously and follow the instruction.   Small cost at beginning  can be save lives and save your business.  Imagine not being able to open the doors because your building suffered a large fire.

If you have received a Violation please contact us

Seemingly out of nowhere, a fire can take place anywhere, even when least expected. Often, the way a person reacts to an emergency situation has a big impact on the damage that is either prevented or sustained. To properly handle a fire, there are a few things to consider that are essential to your safety. Here are some ways to keep your cool and maintain control in the event of a fire or other emergency.

Know What to Expect

Preparation is the key to dealing with any potentially dangerous circumstance. Avoid facing the unknown elements of a fire by learning more about them. For example, there are a number of different types of fires. Depending on how a fire starts, it takes a certain approach to extinguish it or escape from it. Water will not always work in putting out a fire, and in some instances, it might even cause the flames to grow and spread faster.

Fire Training

There are Fire Training classes available to help you become more familiar with fire procedures. You should also know about the different kinds of fire extinguishers, when they are used, how to use them, and where they are located. All of these things are essential in providing you with the knowledge you need to be well informed of the various aspects of fire fighting and prevention. Evacuation Planning is another precaution that is very helpful because it is a good idea to practice leaving a building before a fire actually happens.

The Importance of Calmness

Since a fire can be overwhelming and a surprise occurrence, it might be natural for some people to panic. However, panicking in an emergency only tends to make things worse. Overreacting can significantly increase the risk of accident, injury, or property damage. In order to find the nearest evacuation routes or exits safely and quickly, you need to be alert and aware of things around you.

By staying calm, you will also be in a better position to help others. Look for the Fire Safety Plan and direct people to the exits accordingly. Plus, you are much more likely to remember to call an emergency number if you are not panicked. When you remain focused on what needs to be done, the information you have learned about fires will be twice as valuable.

You can stay prepared for all possible fire emergencies, and get more information about Fire Safety Plans, fire extinguishers (where they should be located and how to use them safely), Evacuation Planning, Fire Training, Fire Audits, and the correction of Fire Violations, by contacting GetFirePlan.com. They will answer any questions you have and help you with all of your fire safety needs.

Just call (778) 574-2895 or simply fill out the form below to schedule a free consultation at your earliest convenience.

As a business owner, it is your responsibility to make sure that your customers and employees are safe in the case of an emergency. This includes preparation and planning, as well as taking the necessary steps to provide fast access to safe evacuation routes. With the right information and assistance, your building will be protected from fires and other potentially dangerous situations.

Education

Knowledge is definitely power when it comes to safety. By offering a fire safety class to employees, you will be arming them with the knowledge required to save lives and your investment. In the training, they will learn about important fire procedures, how to use a fire extinguisher, where to go during a fire, the right way to direct customers, and an overview of the fire codes and regulations in your local area.

Yearly classes are recommended so that your staff will feel confident about the evacuation process, which will reduce panic substantially. Many accidents are caused by an overreaction to an emergency, and if the employees remain calm, they will be in a much better position to control the situation and help the customers. Another good idea is to have all new employees take the class when they are hired.

Maintenance

It’s not enough to have smoke alarms and/or detectors; they need to be working in order to be effective. Check the batteries in all smoke detectors at least twice a year and follow the instructions to run a test. Often, the first indication of a fire will be smoke, and it is essential that everyone in the building is alerted as soon as possible.

Evacuation

When a fire happens, it is logical for a person to automatically look for a way out of the building. However, if everyone runs for the same exit at the same time, it could result in injuries. A Fire Safety Plan is the best way to inform people about the safest exits and how to get to them quickly. Plus, many businesses and construction sites must have a Fire Safety Plan on the premise to comply with the ordinances of the city.

Not all Fire Safety Plans are the same. To make sure that your plan is officially approved by British Columbia, please contact GetFirePlan.com for more information and a free consultation. In addition to designing a customized Fire Safety Plan that is equally impressive in appearance and reliability, they will help you with Evacuation Planning, Fire Training, Fire Audits, and the correction of Fire Violations.

You can call (778) 574-2895 or simply fill out the form below to experience the quality and convenience of GetFirePlan.com today.

How to Avoid Fire Violations

The compliance with fire code regulations is mandatory for a commercial building or construction site to receive an operating license. More importantly, the regulations are intended to protect the people inside of the building and the property itself in case of an emergency. If the exact qualifications are not met, a business could be in violation and suffer the penalties of the law. Here are the best ways to prevent fire code violations and keep your building safe.

Know the Codes in Your Area

Although many British Columbia fire codes are similar from city to city, each municipality has their own set of ordinances. They vary depending on location and it is important for you to understand the ones that are specific to your building. Often times, a business owner is surprised by a violation because they were simply unaware of a certain regulation. If you do not know what the rules are, you cannot follow them.

Fire codes are updated as needed, and businesses should be informed about any changes or new laws that apply to their situation. Routine inspections are scheduled to verify that all buildings are protected, and to look for any fire violations. An easy way to ensure that your business never unintentionally breaks any of the codes is to have a Fire Audit before your inspection takes place.

Fire Audits

The benefit of a fire audit is that it will give you advance notice of any violations you might have on the premise; allowing you the necessary time to fix them and avoid any penalties. Without an audit, the risk of a violation increases. Be sure to have your audit done by a professional expert that is skilled in all of the regulations.

Penalties

A fire code violation is not only an inconvenience, it can be costly too. Penalties, such as fines, are common, but a business could be closed down temporarily. During this time, the losses are more substantial because the business is not operating. Fines are determined by the extent of the violation and the number of them.

To guarantee that your building or construction site is always prepared for a fire (or fire inspection), please contact GetFirePlan.com as soon as possible. No matter where your business is located, the staff at GetFirePlan.com is trained in all fire codes for every part of British Columbia. You can schedule a free consultation by calling (778) 574-2895 or just fill out the form below for a fast response.

As the saying goes, the best way to stop a fire is to prevent it from happening. There are many things that you can do to drastically reduce the potential for a fire in your home or business. In fact, just following a few simple steps and being informed can go a long way in fire protection. Here are some great fire prevention tips:

Smoke Alarms and Detectors

Every floor of a building should have at least one smoke detector or some type of alarm. This is important because smoke is often the first sign of a fire and the sooner you detect it, the more time you will have to evacuate. Check the batteries in your smoke detectors routinely and make sure that they are working properly.

Emergency Phone Numbers

Once you are safely out of the building, call an emergency number immediately. Program them into all cell phones and keep them updated. Also, post emergency numbers by all phones inside of the building as a safety precaution.

Space Heaters

If you are using a space heater, keep it at least 3 feet away from everything that could burn, even the wall. Furniture, clothes, curtains, and people should all be kept away from a space heater. Never leave a heater on while you are sleeping or not in the building.

Kitchens

Many fires begin in the kitchen. Follow the instructions on all cooking equipment and ingredients. Remove combustible materials from the cooking area and keep handles turned inward (so they cannot be knocked over by accident). Learn about the types of fires that can start in a kitchen and how to deal with them correctly; this includes fire extinguisher instructions and locations.

Plan Ahead

Find the safest evacuation routes before a fire emergency situation. A Fire Safety Plan is the easiest way to ensure that everyone in the building knows exactly where to go during a fire. It is also recommended to practice using fire training and evacuation drills. Read all of the operating procedures and specifications on every fire extinguisher so that you are comfortable using it on a smaller fire.

To stay prepared for all possible fire emergencies, and for more information about Fire Safety Plans, fire extinguishers (where they should be located and how to use them safely), Evacuation Planning, Fire Training, Fire Audits, and the correction of Fire Violations, please contact GetFirePlan.com for a free consultation.

You can call (778) 574-2895 or simply fill out the form below to experience the quality and convenience of GetFirePlan.com today.

In any emergency situation, every second counts. A fire has the potential to hurt everything in its path, including people and valuable investments. The more you know about how to approach a fire, the better you will be at reducing the damage and preventing a tragedy. Here are some very important fire safety tips to remember:

Know the cause of the fire before trying to put it out. Depending on what kind of fire you are dealing with, extinguishing it requires a specific procedure. For example, water will not put out every type of fire. It could even make the fire worse. There are several types of fire extinguishers and each one is designed for a certain fire, based on how it started. Make sure that you are using the right fire extinguisher to avoid inadvertently increasing the size and scope of the flames.

* You can read more about some of the differences in fire extinguishers and fires in the following article: What Type of Fire Extinguisher Should You Have?

Never attempt to face a fire that is too big. Fire extinguishers are a great way to lessen or eliminate a fire, but they can only be used on smaller fires. If the fire is out of control, the best thing to do is to get as far away from it as possible and call for help. Let the fire department use their equipment and avoid taking unnecessary risks.

Read the labels of all fire extinguishers and stored materials. The instructions on a fire extinguisher will indicate the safest distance to operate it, as well as the size of fire it can extinguish. Because these instructions will vary, you need to understand the characteristics of the one you have before you actually use it. Also, stay informed about any ingredients that stored materials contain. If they are flammable or have the ability to cause a fire, be careful about where they are kept.

* You can read more about the correct way to use a fire extinguisher in the following article: How to Use a Fire Extinguisher

Aim the fire extinguisher at the base of the fire, not the flames. While it might seem logical to shoot for the flames first, you will have a much better chance of putting out a fire by directing the fire extinguisher to the base or fuel source. Normally located at the bottom of a fire, the fuel is the reason why a fire burns, so eliminating it will stop it faster.

* You can read more about the correct way to use a fire extinguisher in the following article: How to Use a Fire Extinguisher

Be prepared. Instead of waiting for a fire to happen, prepare for it in advance by planning evacuation routes, mounting fire extinguishers in the proper locations, installing smoke detectors, and having a Fire Safety Plan visible where people can see it. Keep all emergency phone numbers easily accessible and close to the phone. Stay low to the ground and do not try to open any door in a fire without feeling it. When the door is hot, find another way out of the room.

A good idea is to practice evacuating a building several times. To really know what it might be like in a fire, try wearing a blindfold in an evacuation drill. Many times, the smoke will limit your vision and being familiar with the safest escape routes will be a tremendous benefit.

For more information about Fire Safety Plans, fire extinguishers (where they should be located and how to use them safely), Evacuation Planning, Fire Training, Fire Audits, and the correction of Fire Violations, please contact GetFirePlan.com for a free consultation. They will help you stay prepared for all possible fire emergencies.

You can call (778) 574-2895 or simply fill out the form below to experience the quality and convenience of GetFirePlan.com today.

IMG_0025People depend on fire extinguishers to work right during a small fire. However, if any part of the extinguisher is not functioning properly, the chances of putting out a fire can be reduced. Therefore, it is necessary to maintain your fire extinguisher and check them routinely.

When to Inspect Fire Extinguishers

All fire extinguishers need to be inspected at least once a month. You should inspect them more frequently if they are located in severe environments. Each inspection does not take long, but it can really make a difference in the way your fire extinguisher operates in an emergency.

How to Inspect a Fire Extinguisher

Inspecting a fire extinguisher is fast and easy. Start by making sure that nothing is blocking it. Coats or other objects can interfere with your ability to reach the extinguisher quickly. Next, look at the pressure level and verify that it is at the recommended setting. Fire extinguishers with a gauge typically are set with the needle in the green zone; not too high or low.

Also, inspect the nozzle and parts of the extinguisher for any damage or wear, including dents, rust, chemical deposits, and leaks. If there are any substances on the outside, clean them off thoroughly. Be sure that the pin and tamper seal are intact (not all fire extinguishers have a seal).

Fire Extinguisher Maintenance

Certain manufacturers recommend shaking a dry chemical fire extinguisher once a month. This will prevent the powder from settling or packing too much. Read the instructions or the label for your fire extinguisher to see if and when it needs to be pressure tested. Hydrostatic testing is usually done after a few years and indicates the safety of an extinguisher’s cylinder. When there is no information available, contact the manufacturer about how often a pressure test is required.

Every fire extinguisher should be recharged as soon as it has been used; no matter how much or how little was used.

Important: Damaged fire extinguishers must be replaced immediately.

For more information about care and maintenance of fire extinguishers, as well as where they should be located and how to use them safely, please contact GetFirePlan.com. They will answer your questions and help you stay prepared for all possible fire emergencies.

You can call (778) 574-2895 or simply fill out the form below to schedule a free consultation.

IMG00092-20100413-1027When a fire occurs, there is little time to spend looking for a fire extinguisher. It needs to be readily available so that the fire can be dealt with quickly and the damage is minimized. By knowing the best locations to put a fire extinguisher, you will be increasing your chance of successfully handling a fire emergency.

The most logical place to keep a fire extinguisher is close to where a fire might happen. Of course, this will depend on any equipment and materials in each room and how flammable they are. For example, rooms that have electrical or cooking equipment, such as circuit breakers and ovens, will require strategic placement of fire extinguishers.

In general, the recommended number of fire extinguishers is at least one per floor. However, that might not be enough if you own a business or a home with certain items. Check with the fire codes in your area to ensure that you meet the specific local and municipal requirements.

Most Common Areas Fires Occur

According to recent statistics, a majority of fires begin in the kitchen. Grease fires can usually be contained or put out if there is a fire extinguisher in the kitchen and in the right location. Do not keep a fire extinguisher next to the stove because in the case of a fire, you could have difficulty reaching it, especially if the fire is on the stovetop. Risking serious injury and burns will make the task of putting a fire out even more dangerous. The fire extinguisher in a kitchen should be close to the door so that it is easily accessible, no matter where the fire starts.

Besides the kitchen, storage rooms and garages are vulnerable to a fire since paints, cleaners, solvents, and various building supplies could be a potential fire hazard. Again, the fire extinguisher is mounted by the door in these rooms. Looking at the labels of stored materials and following the instructions is definitely a good idea.

Restaurants, hotels, motels, retailers, apartments, condos, and other commercial buildings must follow all of the regulations when designing a building and acquiring a Fire Safety Plan. To learn more about fire extinguishers, where they should be located, and how to use them safely and correctly, please contact GetFirePlan.com for a free consultation. You can call them at (778) 574-2895 or fill out the form below.

iStock_000011696407Medium_Fire Extinghisher trainingWhen most people think of a fire extinguisher, they might not realize how many different kinds of them actually exist. However, using the wrong type of fire extinguisher can be very dangerous. It is good to know as much as possible about both the fire and the fire extinguisher to avoid any preventable damage, and to maximize the results of your fire safety precautions.

There are essentially four categories of fire extinguishers. Each category is based on a particular type of fire. Numbers are used as a rating system to indicate just how much fire that extinguisher can handle. Basically, the higher the number, the greater the fire-fighting power a unit has.

Class A Fires and Fire Extinguishers

Class A fire extinguishers are for fires that result from paper, wood, cardboard, most plastics, and other normal combustible elements. In a Class A fire extinguisher, the numerical rating will represent the amount of water it contains, as well as the extent of the fire it can extinguish.

Class B Fires and Fire Extinguishers

Various combustible liquids, such as gasoline, kerosene, grease, and oil, are the source of a Class B fire. The numerical rating on a Class B fire extinguisher is referring to the size of fire it can extinguish, which is measured in square feet and is approximate.

Class C Fires and Fire Extinguishers

A Class C fire usually starts with electrical equipment. Wiring, appliances, circuit breakers, and outlets have the capacity to generate a Class C fire. One of the most important things to remember about a Class C fire is that it cannot be put out with water. If water is used on an electrical fire, there is a serious risk of shock. Class C fire extinguishers have an extinguishing agent that is non-conductive. They do not have a numerical rating.

Class D Fires and Fire Extinguishers

Mainly located in chemical laboratories, Class D fires involve combustible metals, including magnesium, titanium, potassium, and sodium. Because they are specifically intended for Class D fires only, Class D fire extinguishers will not have a rating.

Water Extinguishers

Air-pressurized water (APW) extinguishers only work on Class A fires caused by ordinary combustible materials. They should never be used on grease fires, electrical fires, or Class D fires. Otherwise, the flames of the fire could grow bigger and spread further. Typically, water extinguishers are filled with water and pressurized with air.

Dry Chemical Extinguishers

Since there are some fires that feature a combination of the classifications above, chemical fire extinguishers are equipped to combat two combinations of Class A, B, and C fires:

The BC fire extinguisher is a dry chemical extinguisher filled with either sodium bicarbonate or potassium bicarbonate. When a BC fire extinguisher is used, it leaves a residue that is mildly corrosive and must be cleaned immediately to avoid damage.

The ABC fire extinguisher is also considered the “multi-purpose” dry chemical extinguisher. It is filled with monoammonium phosphate, which is a yellow powder that leaves a sticky residue. Similar to the residue left by the BC fire extinguishers, the residue from ABC fire extinguishers can cause damage, especially to computers and electrical appliances.

The Carbon Dioxide (CO2) Fire Extinguisher is used for Class B and Class C fires. Carbon dioxide is a non-flammable gas and it is highly pressurized in a CO2 fire extinguisher. In fact, the pressure has even been known to release particles of dry ice from the nozzle.

Choosing the Right Fire Extinguisher

As you can see, there are plenty of options available to you in fire extinguishers. The key to choosing the right one is to understand how it will be used. For example, CO2 fire extinguishers are not very effective on Class A fires, and the insufficient oxygen might reignite the fire.

Dry chemical fire extinguishers do leave a substance on whatever has been extinguished, but it is non-flammable and might reduce the risk of re-ignition. And CO2 fire extinguishers do not leave any harmful residues; excellent for electrical fires on or near a computer or other valued equipment. Different rooms may require different types of fire extinguishers, depending on what is in the room. Look at the materials and items in a room to determine which extinguisher is appropriate.

Overall, if you are not sure of which fire extinguisher to purchase, check with an expert or fire marshal. To make sure that your fire extinguishers are located in the correct places and are compliant with the British Columbia fire codes in your area, please contact GetFirePlan.com. You can schedule a free consultation by calling (778) 574-2895 or with the form below.

Should You Use a Fire Safety Plan Template?

FIFTH FLOOR

According to British Columbia Fire Codes, many businesses and/or construction sites are required to obtain a Fire Safety Plan. Having a quality plan will protect the people inside and around the building, as well as the property itself. The easiest and most popular way to get a Fire Safety Plan for your business is to purchase one from a company that has experience and knowledge with all of the laws and regulations in your local area. But some people use a fire safety plan template instead, which does not exactly guarantee protection.

What is a Fire Safety Plan Template?

Fire safety plan templates are simply examples of plans that have already been done. They can be found online at various resources and in several forms. One of the reasons a fire template might be useful is to get an idea of what an actual plan looks like and the sections it includes.

Can a Fire Safety Plan Template Save You Time and Money?

By trying to copy an existing fire plan, a person could assume that all of the requirements of the city are being met. However, this is not always the case. In fact, ordinances vary depending on location, so fire templates will not necessarily reflect your individual situation.

Unlike an expertly produced Fire Safety Plan, a fire template will not be approved. That means it is possible to still have fire code violations with your plan. Since the violations could be in the form of a fine, a template might end up costing money instead of saving it. Plus, you would be spending a lot more time and effort into the project, as compared to having it done for you correctly.

Fortunately, getting an official Fire Safety Plan is both fast and convenient with GetFirePlan.com. They can answer all of your questions and provide the ultimate fire protection. Every GetFirePlan.com Fire Safety Plan is Approved and comes with an exclusive 100% Money Back Guarantee.

In addition to designing a customized Fire Safety Plan that is equally impressive in appearance and reliability, the skilled and expertly trained staff will help you with Evacuation Planning, Fire Training, Fire Audits, and the correction of Fire Violations.

You can call (778) 574-2895 or simply fill out the form below to schedule a free consultation today.

[include-page id=”201″]

Copyright © 2019 Getfireplan.com. All rights reserved.